CALL NOW : 020 30393000
0 +

YEARS OF EXPERIENCE

0 's

OF PROJECTS

0 %

SATISFACTION

Ceiling Levelling and Plastering at Briggs Farm

Complex plastering challenges whilst delivering high-quality results.

Problem

At Briggs Farm, Hampton Hill Plasterers were tasked with rectifying an uneven ceiling installed by a previous contractor. While the ceiling was structurally sound, its uneven surface made it unsuitable for a standard skim coat of multifinish plaster, posing a challenge to achieving a smooth and professional finish.

SOLUTION

To correct the issue and deliver a flawless result, we implemented the following process:

  1. Application of a Levelling Backing Coat
    Hampton Hill Plasterers began by preparing a thicker, durable backing coat purposely designed for levelling. This allowed for the application of a corrective layer to the uneven ceiling. Using long, straight edges, the surface was carefully ruled to create an even plane, addressing the inconsistencies left by the previous contractor.

  2. Smooth Multi finish Plaster Coats
    Once the levelling coat had been properly set, Hampton Hill Plasterers then applied two smooth coats of multifinish plaster. These layers were meticulously trowelled and polished to ensure a seamless and flawless finish, leaving the ceiling ready for painting.

SUMMARY

Hampton Hill Plasterers successfully transformed the uneven ceiling into a perfectly level and polished surface. With the issue resolved, the builder expressed satisfaction with the outcome, and the painters were able to proceed to the next stage. This project demonstrates Hampton Hills’ ability to address complex plastering challenges and deliver high-quality results that meet the expectations of both builders and clients.

Plastering - Levelling backing coat
Plastering - Smooth multi finish
Plastering - Polished ready for painting

Questions & Answers

Here is a selection of FAQs that Hampton Hill Plasterers are frequently asked. If there’s something you’re looking for that isn’t covered here, please let Hampton Hill know, and they will add the answer.

Hampton Hill’s work is fully insured with Direct Line for Business and all workmanship is guaranteed.

Short answer, no. Although it’s not harmful.

No, this is a common misconception. Flat without lumps and bumps and no major rough patches is the key to having a good paintable finish.

Is Hampton Hill Plasterers insured?
Hampton Hill’s work is fully insured with Direct Line for Business and all workmanship is guaranteed.

In many cases, yes. It will most definitely improve curb appeal for a future sale and also secure the weathering of the property. In cases of insulation render it is an investment and in many ways will return the money spent.

Yes, though this is widely considered the most expensive option and often creates more work for further trades. Although, I would argue that in time it would be a better investment for return on your money spent.

Different types of plastering

Gypsum Plaster (Multi Finish):
A quick-drying plaster made from gypsum, used for internal walls and ceilings.

Lime Plaster:
A breathable plaster made from lime and sand, often used in older buildings.

Under Coat Plaster (Bonding, Hardwall): a type of undercoat plaster used primarily for providing a strong and even base on difficult surfaces before applying a finishing coat such as multi finish. 

Sand and cement render: 
is a traditional type of exterior or interior wall covering. It is applied to building surfaces to create a durable, protective, and aesthetically pleasing finish inside as an undercoat plaster or outside as a render.

Keep windows open to allow air flow, never try to dry with heating on or added heat.

Yes, you can plaster over old plaster if it is in good condition. The old surface should be cleaned, and any loose or damaged areas should be repaired. A bonding agent or PVA (polyvinyl acetate) glue can be applied to help the new plaster adhere to the old surface.

It’s important to wait until the plaster is fully dry before painting or wallpapering. This usually takes 2-3 days in a household environment, but it can take longer depending on the conditions. Always ensure the plaster has turned from a dark to a light uniform color before starting any finishing works.

Yes, the application of render is labour-intensive so requires lots of covering to ensure a clean tidy job.

This is subject to the render you chose, most new renders to the market are pre coloured to your chose.

Usually render will be good for 20 years plus. It depends on up keep and weathering to the house itself.

Talk to us